Mechatronic units consisting of a motor, control system, sensors, and housing!
Features
Holding torques from 0.06 Nm to 3.00 Nm available from stock
- Integrated encoder solution: open-loop (standard version) or closed-loop (C suffix)
- Comes standard with a ready-to-use housing (IP20); optionally available with an aluminum housing (IP42); IP54 available upon request
- Variants specifically designed for equipment manufacturing are available
- Control via CANopen, Modbus RTU, or configurable pins
- Custom protocols available
- Custom hardware configurations available, even in small quantities
- Operating voltages from 12 V to 48 V
Standard Items – MotionDrive with plastic housing
Stepper motor controller with an electronic unit featuring CANopen or ModBus firmware
Magnetic encoder readout, open-loop
Ready-to-use 3D-printed plastic housing, IP20
Protection against accidental contact with the electronics
MD28 – MotionDrive28
Stepper motor with a 28 mm flange size (NEMA11) and a holding torque of 0.06 to 0.12 Nm
Stepper motor controller with an electronic unit featuring CANopen or Modbus firmware, 24 V, 1.1 A RMS, 2 A peak
MD28-006
0,06 Nm Holding torque
MD28-009
0.09 Nm Holding torque
MD28-012
0.12 Nm Holding torque
MD42 – MotionDrive42
Stepper motor with a 42mm flange size (NEMA17) and holding torque of 0.22 to 0.70 Nm
Stepper motor controller with an electronic unit featuring CANopen or ModBus firmware, 24V, 2.2A RMS, 4A peak
MD42-022
0.22 Nm Holding torque
MD42-036
0.36 Nm Holding torque
MD42-044
0.44 Nm Holding torque
MD42-070
0.70 Nm Holding torque
MD60 – MotionDrive60
Stepper motor with a 60 mm flange size (NEMA24) and a holding torque of 2.10 to 3.00 Nm
Stepper motor controller with an electronic unit featuring CANopen or Modbus firmware, 2.8 A RMS, 24 V logic – 48 V driver, 24 V PLC I/O
MD60-210
2.10 Nm Holding torque
MD60-310
3.10 Nm Holding torque
MotionDrive60 with Closed Loop (suffix -C)
in a plastic housing
Ready-to-use IP20 plastic housing with protection against contact with the electronics
with closed-loop magnetic encoder evaluation
MD60-210-C
2.10 Nm Holding torque
MD60-300-C
3.00 Nm Holding torque
MotionDrive60 with closed-loop control and inductive encoder (suffix -CI)
in a plastic housing
Ready-to-use IP20 plastic housing with protection against contact with the electronics
with closed-loop magnetic encoder evaluation
MD60-210-CI
2.10 Nm Holding torque
MD60-300-CI
3.00 Nm Holding torque
MotionDrive, including SP metal housing
Stepper motor controller with an electronic unit featuring CANopen or ModBus firmware
Magnetic encoder readout, open-loop
Aluminum housing to protect the electronics
Protected against solid foreign objects with a diameter of 1.0 mm or greater and against dripping water in accordance with IP42
MD28-SP – MotionDrive28-SP
Stepper motor with a 28 mm flange size (NEMA11) and a holding torque of 0.06 to 0.12 Nm
Stepper motor controller with an electronic unit featuring CANopen or Modbus firmware, 24 V, 1.1 A RMS, 2 A peak
MD28-006-SP
0.06 Nm Holding torque
MD28-009-SP
0.09 Nm Holding torque
MD28-012-SP
0.12 Nm Haltemoment
MD42-SP – MotionDrive42-SP
Stepper motor with a 42m flange size (NEMA17) and holding torque of 0.22 to 0.70 Nm
Stepper motor controller with an electronic unit featuring CANopen or Modbus firmware, 24V, 2.2A RMS, 4A peak
MD42-022-SP
022 Nm Holding torque
MD42-036-SP
0.36 Nm Holding torque
MD42-044-SP
0.44 Nm Holding torque
MD42-070-SP
0.70 Nm Holding torque
MD60-SP – MotionDrive60-SP
Stepper motor with a 60 mm flange dimension (NEMA24) and a holding torque of 2.10 to 3.00 Nm
Stepper motor controller with an electronic unit featuring CANopen or Modbus firmware, 2.8 A RMS, 24 V logic – 48 V driver
Includes a metal housing to protect the electronics, 1x M8 male connector, and 2x M8 female connectors
MD60-210-SP
2.10 Nm Holding torque
MD60-300-SP
3.00 Nm Holding torque
MotionDrive60-SP with closed-loop control (suffix -C)
in a metal housing
Includes a metal housing to protect the electronics (IP42), 1x M8 plug, and 2x M8 sockets
with closed-loop magnetic encoder evaluation
MD60-210-C-SP
2.10 Nm Holding torque
MD60-300-C-SP
3.00 Nm Holding torque
MotionDrive60-SP with closed-loop control and inductive encoder (suffix -CI)
in a metal housing
Includes a metal housing to protect the electronics (IP42), 1x M8 male connector, and 2x M8 female connectors
With closed-loop magnetic encoder evaluation and an inductive encoder
MD60-210-CI-SP
2.10 Nm Holding torque
MD60-300-CI-SP
3.00 Nm Holding torque