Stepper motors that are mechanically compatible with the NEMA standard.
The bipolar 2-phase motors are available on short notice in sizes NEMA11 (28 mm flange), NEMA17 (42 mm flange), and NEMA24 (60 mm flange).
The torque of the stepper motors available from stock ranges from 0.06 Nm to 3.10 Nm. In addition to the standard version with open cable ends, all models are also available with pre-installed JST PH or EH series connectors. For use in combination with controllers that utilize magnetic encoder detection, this option includes a magnet embedded in the rear end of the shaft.
- Stepper motors with open wire ends and no magnet (suffix -A),
- Stepper motors with an encoder magnet and JST connectors (suffix -M)
–> NEMA23 stepper motors are currently available as single-unit samples.
–> More stepper motors (e.g., with flange dimensions of 20 mm and 86 mm) are being added all the time!
The stepper motors are available on short notice and have a reasonable lead time, even for large quantities, custom orders, and customer-specific modifications.
If you’re interested or have any further questions, please contact us!
Stepper motors NEMA 11
with 28mm flange
PM28SH18-067-32-A –> 0.67A, 32mm long, 0,06Nm Holding torque, without magnet, with open cable ends
PM28SH18-067-32-M –> 0.67A, 32mm long, 0,06Nm Holding torque, with magnet, 4-pin PH connector
PM28SH18-067-45-A –> 0.67A, 45mm long, 0,095Nm Holding torque, without magnet, with open cable ends
PM28SH18-067-45-M –> 0.67A, 45mm long, 0,095Nm Holding torque, with magnet, 4-pin PH connector
PM28SH18-067-51-A –> 0.67A, 51mm long, 0,12Nm Holding torque, without magnet, with open cable ends
PM28SH18-067-51-M –> 0.67A, 51mm long, 0,12Nm Holding torque, with magnet, 4-pin PH connector
Captive linear aktuator:
PM28LC18-04-32-A-UGBG-012 –> 0.42A, 32mm long, 0.0635mm/step, lead screw pitch: 1.27mm/U, stroke: 12.7mm, thrust force: 70N, 1.8°, with anti-rotation device, with open cable ends
Stepper motors NEMA 17
with 42mm flange
PM42SH18-10-33-A –> 1,0A, 33mm long, 0,27Nm Holding torque, without magnet, with open cable ends
PM42SH18-20-33-M –> 2,0A, 33mm long, 0,22Nm Holding torque, with magnet, 4-pin PH connector
PM42SH18-10-38-A –> 1,0A, 38mm long, 0,35Nm Holding torque, without magnet, with open cable ends
PM42SH18-20-38-M –> 2,0A, 38mm long, 0,36Nm Holding torque, with magnet, 4-pin PH connector
PM42SH18-10-47-A –> 1.0A, 47mm long, 0,49Nm Holding torque, without magnet, with open cable ends
PM42SH18-28-47-A –> 2.8A, 47mm long, 0,40Nm Holding torque, without magnet, with open cable ends
PM42SH18-20-47-M –> 2.0A, 47mm long, 0,44Nm Holding torque, with magnet, 4-pin PH connector
PM42SH18-10-60-A –> 1.0A, 60mm long, 0,70Nm Holding torque, without magnet, with open cable ends
PM42SH18-20-60-M –> 2.0A, 60mm long, 0,70Nm Holding torque, with magnet, 4-pin PH connector
Stepper Motos NEMA 23 –> just samples
PM57SH18-28-41-A –> 2,8A, 41mm long, 0,55Nm Holding torque, without magnet, with open cable ends
PM57SH18-28-41-M –> 2,8A, 41mm long, 0,55Nm Holding torque, with magnet, 4-pin EH connector
PM57SH18-28-51-A –> 2,8A, 51mm long, 1,01Nm Holding torque, without magnet, with open cable ends
PM57SH18-28-51-M –> 2,8A, 51mm long, 1,01Nm Holding torque, with magnet, 4-pin EH connector
PM57SH18-28-56-A –> 2,8A, 56mm long, 1,26Nm Holding torque, without magnet, with open cable ends
PM57SH18-28-56-M –> 2,8A, 56mm long, 1,26Nm Holding torque, with magnet, 4-pin EH connector
PM57SH18-28-76-A –> 2,8A, 76mm long, 1,89Nm Holding torque, without magnet, with open cable ends
PM57SH18-28-76-M –> 2,8A, 76mm long, 1,89Nm Holding torque, with magnet, 4-pin EH connector
Stepper motors NEMA 24
with 60mm flange
PM60SH18-28-45-A –> 2,8A, 45mm long, 1,10Nm Holding torque, without magnet, with open cable ends
PM60SH18-28-45-M –> 2,8A, 45mm long, 1,10Nm Holding torque, with magnet, 4-pin EH connector
PM60SH18-28-56-A –> 2,8A, 56mm long, 1,65Nm Holding torque, without magnet, with open cable ends
PM60SH18-28-56-M –> 2,8A, 56mm long, 1,65Nm Holding torque, with magnet, 4-pin EH connector
PM60SH18-28-65-A –> 2,8A, 65mm long, 2,20Nm Holding torque, without magnet, with open cable ends
PM60SH18-28-65-M –> 2,8A, 65mm long, 2,20Nm Holding torque, with magnet, 4-pin EH connector
PM60SH18-28-86-A –> 2,8A, 86mm long, 3,10Nm Holding torque, without magnet, with open cable ends
PM60SH18-28-86-M –> 2,8A, 86mm long, 3,00Nm Holding torque, with magnet, 4-pin EH connector